Description

Chemical Name: Perfluorononene epoxide 

CAS No: 2803620-31-5

As the power density of a single cabinet in a large data center rapidly increases, the requirements for heat dissipation are higher and higher. Submerged liquid cooling technology has the characteristics of high energy efficiency, high density, high availability and high reliability, it is gradually replacing the air cooling and becoming the ultimate solution for new data center heat dissipation and green energy saving. Perfluorononene epoxide TPD-2800EP has high insulation performance, high boiling point, superior environmental performance, high compatibility with materials, and can be used as a single-phase liquid cooling material for submerged heat dissipation scenarios in data centers. 

Features

• Colorless and odorless, non-flammable 
• Environmentally friendly, no damage to the ozone layer
• High density, low surface tension, low viscosity
• Insoluble in water
• Good thermal stability
• High latent heat of evaporation
• Excellent material compatibility 
• No damage to electronic precision equipment

Technical Index

Item	Typical Value
Appearance	Clear colorless and odorless liquid
Purity, %	＞99.0%
Boiling Point, °C	124.4
Freezing Point, °C	-82
Density (25°C, g/cm3)	1.855
Kinematic Viscosity (25°C, mm2/s)	1.376
Surface Tension (25°C, dynes/cm)	15.69
Vapor Pressure (25°C, kPa)	1.516
Specific Heat (25°C, kJ/kg.k)	1.107
Latent Heat of Vaporization, kJ/kg	82.8
Thermal Conductivity (W/m.k, 25°C)	0.0614
Dielectric Strength (2.5 mm, kV)	＞35.7
Dielectric Constant (1 MHz)	2.09
Dielectric Loss (10 MHz)	0.00029
Volume Resistivity, Ω.mm	≥1×1015
Critical Temperature, °C	196.54
Critical Pressure, MPa	4.28
Flash Point, °C	None
ODP	0
GWP	108

Applications 

• Heat transfer cooling medium for semiconductor dry etching, wafer testing, packaging, etc.
• Heat conduction cooling medium for data processing electronic.
• Cleaning agent for high temperature electronic products.
• As an intermediate to synthesize fluorinated surfactants and other fluorinated chemicals.
• Solvent for anti-fingerprint coating such as electronic display screen. 

Packing

N.W.25KG Iron drums or 250KG Iron drums.

Transportation & Storage

1. Transported as non-dangerous cargo. 

2. It is volatile, pay attention to the tightness of the product during storage and transportation.

3. It should be stored in a closed high-density polyethylene tank or tin tank with internal coating and placed in a clean, dry warehouse.

4. Keep the container closed to prevent high temperature and sunlight, away from heat source, fire source and acid, alkali, strong oxidants, etc.

5. Avoid violent vibration during transportation and avoiding upside-down when
stacking.

Shelf Life

3 years.

Description

Chemical Name: Perfluoro nonenyl trifluoroethyl ether

CAS No: 176374-86-0

Chemical Structure:

TPD-HFE-7160 has excellent heat transfer ability, good insulation performance, excellent environmental protection performance and high compatibility with various materials. At present, it is the liquid cooling working fluid used in the mainstream semiconductor dry etching, wafer testing, packaging testing and other semiconductor manufacturing processes, and it can also be widely used as engineering liquid to detect leakage, cold and heat shock test, insulation test, high temperature aging test and so on. Its high voltage shock resistance can also be used as a cooling medium for EMU traction transformers.

Description

Chemical Name: Perfluoro(4-methylpent-2-ene)

CAS No: 2070-70-4

Chemical Structure: 

Description 

PFPE Masking Oil TOPDA B-40 has a narrow molecular distribution, low surface tension and low evaporation loss under vacuum conditions. It has good viscosity temperature, high dielectric constant, good insulation and other performance characteristics. So it can work as an ideal masking oil for vacuum coating.

Equivalent Product: Fomblin Y04

Description

PFPE Oil TOPDA T Grades are low molecular weight perfluoropolyether(PFPE) fluids with only carbon (C), fluorine(F), and oxygen(O) atoms on the molecular chain.

Features

• Wide range of working temperatures 
• Good low temperature properties
• Unmatched chemical and solvent resistance 
• Good radiation stability 
• Excellent compatibility with metals, plastics, elastomers
  
• Excellent insulation and dielectric properties 
• No flash or fire point 
• Non-toxic, environmental friendly 
• ODP is 0
  

Technical Index

Item	Unit	T-170	T-200	T-230	T-270
Boiling Point	°C	170	200	230	270
Apperance			Clear Transparent Liquid
Kinematic Viscosity at 20°C	mm2/s	2.10	3.20	5.50	15.50
Pour Point	°C	＜-90	＜-80	＜-70	＜-60
Density at 25 °C	g/cm3	1.78	1.80	1.83	1.86
Moisture Content	mg/kg	＜20	＜20	＜20	＜20
Acid Value	mg.KOH/g	0.01	0.01	0.01	0.01

Applications 

PFPE Oil TOPDA T Grades are widely used as heat transfer fluids in chemical, semiconductor, nuclear and pharmaceutical industries.

Packing

N.W.1KG or 5KG plastic drums or N.W.50KG plastic drums other packing according to the clients’ request.

Transportation & Storage

1. Transported as non-dangerous cargo. 

2. Stored in a cool, dark, dry and ventilated place. 

3. Avoid contact with aluminum chloride and other Lewis acid 

4. Keep the container tightly closed.

Shelf Life

3 years.

Description

Chemical Name: Ethyl Perfluorobutyl Ether

Equivalent Product: 3M Novec HFE-7200

CAS No: 163702-06-5

Ethyl Perfluorobutyl Ether TPD-HFE-7200 is a clear, colorless and low-odor fluid used to replace ozone-depleting substances (ODSs), compounds with high global warming potential (GWP) and chlorinated materials in many applications. It has a higher boiling point than most CFCs, HCFCs and HFCs, reducing evaporative losses. The low surface tension, low viscosity and strong wettability make it ideal for use in vapor degreasing, electronic display, anti-fingerprint coating solvent, cosmetic wetting agent and cold cleaning. In addition, it has excellent heat transfer ability, good insulation performance, superior environmental performance and high compatibility with a variety of materials make it ideal for use in liquid cooling working medium component in semiconductor manufacturing processes, such as semiconductor dry etching, wafer testing and packaging testing. Its chemical and thermal stability, nonflammability and low toxicity make it useful for other industrial applications such as specialty solvent and heat transfer applications.

Description

Other Name: Perfluoropolyether diol, PFPE diol, PFPE di-Alcohol

Chemical Structure:

Description

Product Name: Perfluoro(2-methyl-3-pentanone)

Chemical Name: 1,1,1,2,2,4,5,5,5-Nonafluoro-4-(Trifluoromethyl)-3-Pentanone, Heptafluoroisopropyl pentafluoroethyl ketone

Equivalent Product: Novec 1230

Molecular Formula: C₆F₁₂O

CAS No: 756-13-8

EC No: 436-710-6

Chemical structure:

At normal temperature, TPD-5112 is a colorless, transparent and insulating liquid. It is the novel environmental harmonic and clean extinguishing agent.

TPD-5112 is a novel substitution of halon extinguishing agent. It helps engineers and facility managers meet environmental regulations while helping ensure the safety of people, reduce risks and preserve business operations with minimal downtime. It features zero ozone depletion potential (ODP) and a global warming potential (GWP) of less than 1. 

TPD-5112 also has the largest safety margin for use in occupied spaces of all clean agents. It effectively extinguishes fire faster than inert gas or water mist systems, requires less volume of fluid and is safe for use with electronics.

Description

Other Name: Bisphenol AF; 2,2-Bis-(4-hydroxyphenyl)hexafluoropane

CAS No: 1478-61-1

Molecular Formula: C₁₅H₁₀F₆O₂

Chemical Structure:

Technical Index

Item	Typical Value
Appearance	White to off-white powder
Content	≥99.5%
Molecular Weight	336.2332
Boiling Point, ℃	400
Melting Point, ℃	160-163
Solubility	Insoluble in water

Application 

Mainly used as vulcanization accelerator of fluororubbers, it also can be used as pharmaceutical intermediates.

Packing

N.W.25KG Carton drums.

Description

TPD-FR678(KSS) is mainly used for halogen-free & phosphorus-free flame retardant of pure transparent polycarbonate.

Features

• Flame retardant specially for polycarbonate 
• Flame retardant grade: UL94-V0(1.6mm)
• Low dosage level, high efficiency 
• Little impact on the physical properties of polycarbonate 
• Maintain the original transparency of polycarbonate 
• Good thermal stability, does not corrode mould & equipment 
• Environmental friendly, halogen & phosphorus free, nont included in the ban of RoHS & WEEE.

Technical Index

Appreance	White powder
Effective content, %	＞99.0
Solubility in water, 20℃	20%
Apparent density	250g/L
Heavy metal(ppm)	Not detected
Decompostion Temp(℃, N2)	＞310

TGA 5℃/min (N2):

Temperature, ℃	Weight loss, %
452	5
502	10
>550	50

Application 

TPD-FR678(KSS) is mainly used as flame retardant for transparent polycarbonate to meet the standard of UL94-V0(1.6mm).

Guide Use

Add 0.20%-0.50% TPD-FR678(KSS) by the weight of polycarbonate, suitable for two double-screw extruder granulation method.

Packing

Environmental friendly carton drum lined with PE bag, net weight 20kg/drum.

Transportation & Storage

1. Transported as non-dangerous cargo.

2. Avoid severe vibration and high temperature sunshine during transportation. 

3. Stored in cool, dry, dark and ventilated place, avoid moisture. 

4. Keep the container tightly sealed or the product will absorb moisture and deliquesce in the air.

Shelf Life

2 years.