Fluorosilicone Elastomer (Fluorosilicone Gel) is a kind of synthetic materials based on polymethyltrifluoropropylsiloxane. The condensation type is usually hydroxyl-terminated, while the addition type is mixed with a certain amount of unsaturated olefins. The molecular weight of room-temperature vulcanized fluorosilicone elastomer is relatively small, ranging from 1×104 to 8×104, while the high-temperature vulcanized type can reach 4×105 to 8×105. 

Fluorosilicone rubber can be obtained by vulcanizing fluorosilicone elastomer with vulcanizing agent and various reinforcing fillers. Fluorosilicone elastomer combines the oil & solvent resistance and chemical resistance of fluorocarbon rubber with the excellent properties of low temperature softness and high tensile retention rate at high temperature of silicone rubber. 

The rubber parts made of fluorosilicone rubber can keep enough elasticity even at the temperature below 55℃. When the temperature is high, they can also be used for a long time. In addition, fluorosilicone rubber has excellent resistance to fuel oil, lubricating oil and chemicals. It is an elastic material with comprehensive properties, its performance is reliable and durable. It is widely used in aerospace, transportation, petrochemical, medical and health industries.

ProductTypeCompositionMain Technical IndexMain Applications
TPD-FS-ER1000Homopolymerized Gum For RTVlow molecular weight polymer of methyl-(3,3,3-trifluoropropyl)siloxaneViscosity, 25℃: 1-200Pa.s
Volatile content，180°C×3hr：1.5%		1. Used as base oil for binding agent and sealing agent in the applications with requirements of oil & solvent resistance, high & low temperature resistance(such as integral sealing or caulking for oil tank of airplane).
2. Agglutinating small parts under difficult conditions such as in limited space, irregular trough, seam, ditch and in some kinds of mini motor. Adhering for some places need solvent cleaning.
3. Bonding and repairing fluorosilicone rubber parts, such as fluorosilicone sealing rings and gaskets.
4. Bonding silicone rubber and fluorocarbon rubber.
TPD-FS-ER1100Copolymerized Gum For RTVlow molecular weight polymer of methyl-(3,3,3-trifluoropropyl)siloxaneViscosity, 25℃: 1-200Pa.s
Volatile content，180°C×3hr：＜6%		1. Suitable to be used as base oil for binding agent to bond fluorosilicone rubber and silicone rubber products, or silicone rubber and fluorocarbon rubber products.
2. Suitable to be used as base oil for binding agent and sealing agent with medium oil & solvent resistance, high & low temperature resistance (e.g. supporting board of fuel operation system and seals in a place to be cleaned with solvents)
TPD-FS-EH2000Homopolymerized Gum For HTVCopolymer made by D3f and methyl-vinyl-cyclosiloxaneMolecular Weight(10,000): 41-180
Vinyl Content, mol%: 0.05-1.0
Volatile Content，150°C×3hr:＜2%		1. Used to produce fluorosilicone rubber parts with various hardness, such as O-rings, gaskets, sealing strips, oil seals, sensor material, diaphragms and clips for spacers.
2. Used as sealing materials in poor condition of environment, which requires material to resist to high & low temperatures, fuels, lubricants, hydraulic oil, transformer oil or nonpolar chemical reagents.
TPD-FS-EH2100Copolymerized Gum For HTVCopolymer of methyl-(3,3,3-trifluoropropyl)siloxane, small amount of vinyl monomer and other organic silicone.Molecular Weight(10,000): 40-130
Vinyl Content, mol%: 0.05-1.0
Volatile Content，150°C×3hr:＜3%		1. Used to produce fluorosilicone rubber parts with various hardness, such as O-rings, gaskets, sealing strips, oil seals, sensor material, diaphragms and clips for spacers.
2. Used to improve the properties of blending materials of silicone rubber and fluorocarbon rubber, and the properties of blending materials of silicone rubber and fluorosilicone rubber.
3. Used as sealing materials in poor condition of environment, which requires material to resist to high & low temperatures, fuels, lubricants, hydraulic oil, transformer oil or nonpolar chemical reagents.