High Tear Strength Fluorosilicone Rubber Compound Topda FS-R8300 is translucent uncatalyzed fluorosilicone rubber base mixed evenly with some kinds of fillers and additives. Its tear strength is higher than normal fluorosilicone rubber compound.
- High tear strength
- Easily pigmented
- Integrated advantages of both silicone rubber and fluororubber
- Wide working temperature range(-60°C-200°C)
- Good resistance to solvent & fuel oil
- High tensile force retention at high temperature which is like silicone rubber
- High insulation
- High selective permeability
- Meet requirements of environment protection
|Appearance||Visual Inspection||Translucent, smooth surface, no visible impurities|
|Specific Gravity(g/cm3, 25℃)||ASTM D792||1.42||1.43||1.48||1.50|
|Hardness(Shore A)||ASTM D2240||30||40||60||80|
|Tensile Strength(MPa) Die C||ASTM D412||9.5||11.0||10.5||9.0|
|Elongation at Break(%) Die C||ASTM D412||350||400||350||250|
|Tear Strength(KN/m) Die B||ASTM D624||40||45||42||30|
|Compression Set (177℃X22hr) (25%) B type||ASTM D395||14||12||14||16|
|Volume Change(reference fuel B)(%)(23℃x70hr)||ASTM D471||22||21||20||20|
How to use
Properties obtained using 0.6-0.8 phr 2,5-bis (tert-butylperoxy)-2,5-dimethyl hexane (DHBP). Molded 15min at 170℃, post-cured 4hr at 200℃. If other cure temperature needed, vulcanization system shall be changed.
Used as sealing materials to resist petroleum oil, lubricant oil, hydraulic oil, transformer oil, and non-polar chemical reagents in low temperature and/or high temperature environments.
Used to produce molded, extruded, and calendered fluorosilicone parts, such as O-rings, gaskets, sealing rings, oil seals, sealing strips, sensor materials, diaphragms, membranes, and clips for fluorosilicone gaskets and pipes.
It is available in 12.5 Kg per plastic bag and 2 bags in 1 carton.
Transportation & Storage
Transported as non-dangerous substance.
Keep it in good condition of packing during transportation.
The product should be stored in a dry and ventilate place at room temperature.
Avoid from acid, alkali chemical materials and other impurities.
Shelf life: 1 year.