Description
TPD-FS-R8600 is uncatalyzed fluorosilicone rubber base mixed evenly with some kinds of fillers and additives. It is suitable for DCBP extrusion molding.
Features
- Extrusion type
- Good resistance to solvent & fuel oil
- Integrated advantages of both silicone rubber and fluororubber
- Easily pigmented
- High insulation
- High selective permeability
Technical Index
Properties obtained using 0.8phr peroxide (2,4-dichlorobenzoy) Vulcanizing agent (DCBP). Press cure: 120°C x 15min, Post-cured 4hr at 200°C.
If other cure temperature needed, vulcanization system shall be changed.
Application
1. It is suitable for DCBP extrusion molding.
2. Can be applied in aviation industry, auto industry, petroleum chemical industry, medical and health care industry and military industry.
Packing
Plastic bags. 10.0KG per sack, 2 sacks in 1 Carton.
Transportation & Storage
1. Transported as non-dangerous substance.
2. Keep it in good condition of packing during transportation.
3. The product should be stored in a dry and ventilate place at room temperature.
4. Avoid from acid, alkali chemical materials and other impurities.
Shelf life
Shelf life: 1 year.